SOLDERING IRON 60W YT-8272

SKU YT-8272 Category

19.75

YT-8272 soldering iron in a traditional casing with resistance heating element powered directly from the mains socket. The simplicity of the design makes the device almost faultless, and with proper care of the soldering iron tip it will serve for many years. The power of the heater is sufficient to properly solder two copper wires or basic electronics in through-hole technology. The thermal power of the tip is high enough to heat up and properly solder components on large soldering fields. A high quality coated copper tip ensures faster heat accumulation and dissipation than standard tips, and a touch-friendly two-component handle with an anti-slip element further improves safety in use.

power supply: 230V
heater power: 60W
depth of opening for the blade: approx. 60 mm
max. blade diameter 6,1 mm

Dimensions of the soldering tip attached to the soldering iron

length: approx. 85 mm
diameter: 5.7 mm
blade tip diameter: 1.5 mm

Other dimensions:

total length with bent cable: 270 mm
length of handle: about 130 mm
length of power cord: 140 cm

The soldering iron needs 2 to 3 minutes to heat up to 350°C.

HOW TO TAKE CARE OF THE TIP

The tips of YATO soldering irons are covered with a material which reduces oxidation of the tip. Long-term heating and mechanical damage gradually degrade the protective layer, and the tip quickly oxidises, which results in problems with melting the solder. Instead of melting and holding on to the soldering tip, the tin peels off and falls off. A proven way to take care of the tip is to tin it. When you first heat up the soldering iron, put a little tin on the tip of the soldering iron and remove the excess, e.g. with brass shavings. The resulting layer of tin protects against oxidation. It is good practice to tin the tip of the soldering iron every time after finishing work.

NOTE

Soldering irons supplied directly from the mains socket should have a plug with earthing pin and should be supplied from a socket with earthing connection. If the metal casing of the heater is not earthed, there is a risk of electrocution, which in the best case will result in burns. All Yato brand soldering irons have a grounded plug which is connected to the metal housing of the heater.

Technical data
Index number YT-8272
EAN 5906083982729
Brand Yato
Gross weight (kg) 0.3750
Master Carton MC 16
Pal 448
Power [W] 60

Related Products