MECHANICAL MICROMETER 0-25MM/0.01MM YT-72300

Technical data
Measuring range: 0 – 25 mm
Accuracy: 0.01 mm
Operating temperature: 5 C – 40 C / 41 F – 104 F
Effect of humidity: Insignificant below 80% relative humidity

Application / Usage
For taking precise measurements in the range from 0 to 25 mm
Directions for use
Preparation for use:
– Clean the measuring surfaces and the guide. Use a cotton cloth for this purpose. Do not use solvents or acids.
– Check the zero position and if necessary adjust with the supplied spanner so that the line marked “0” on the drum coincides with the horizontal scale line.

Measuring method:
– The drum can only be rotated after the locking clamp has been unlocked.
– Extend the measuring surfaces to a distance slightly greater than the object to be measured.
– Then turn the drum roughly and continue tightening by turning the knob of the friction clutch.
– Stop tightening when the clutch engages, i.e. further rotation of the knob will not rotate the drum.
– Read the result of the measurement according to the measuring principle shown in the figure.

It is advisable to clamp the workpiece or micrometer before starting the measurement. This will allow the highest accuracy to be achieved.
It is also advisable to carry out several measurements so as to obtain an arithmetic average of the results.

Technical data
Index number YT-72300
EAN 5906083723001
Brand Yato
Gross weight (kg) 0.3170
Master Carton MC 30
Pal 900
Material aluminium, carbon steel
Type Manual
Weight [g] 317