The Kreg® Rip-Cut™ turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut™, you can cut with the confidence you want and the precision you need. The Rip-Cut™ easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. It does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want (up to 610 mm) using the built-in measuring scale, and then make your cut. With this built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. The Rip-Cut™ is very easy to use. Simply mount your saw to the universal sled and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.

Highlights

• Aluminum and impact resistant polymer construction
• Guide rail engages the measurement on a built-in scale
• Suitable for left and right hand saws
• With built-in index stop and precision cursor
• Cutting widths 25 mm up to 610 mm
• Longitudinal and cross cuts in plywood, MDF and boards
• Oversized edge guide allows for accurate handling throughout the entire cut
• Universal carriage fits most circular saws: With right or left saw blade
• Reversible edge guide: Suitable for left- and right-handed users

Scope of Delivery

• 1x Universal Saw Sled
• 1x Aluminum Guide Rail
• 1x Precision Edge Guide
• 1x Owner’s Manual